10″ Carbon Block Water Filter
The carbon block replacement filter reduces the content of chlorine and chlorination by-products, the concentration of heavy and non-ferrous metals, phenol, oil products, and pesticides. Improves colour, taste, and odour of water. Due to its block structure removes sediment size up to 10 micron.
It is suitable as the third stage of purifying in 3-stage or reverse osmosis filters. The filter is recommended to be replaced every 3 months regardless of the volume of consumed water.
The replacement filter is intended for cold tap water only. The filter capacity depends on the quality of feed water and might fluctuate from the values indicated.
Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality. Before use, plunge a new replacement filter into cold water, and keep it submerged at least for 8 hours. After the filter replacement, discharge at least 10 liters of filtered water into the drain.
|Full height, mm
|Maximum outer diameter, mm
|Maximum capacity, L
|Operational temperature of water, °C
|Recommended filtration rate, L/min
|Nominal filtration rating, micron
|Service life, not more than, months
: Undefined variable: shareTitle in /home/watercare/public_html/wp-content/themes/watercare-flo/theme-settings/theme-ecommerce.php
on line 27